Filter
Top Products
Technical manual
Page 15 of 72
ST0133 – A 02/09
SOLAR
The flow and return of the collector are connected using a 800mm long insulated corru-
gated stainless steel flexible hose (9.1). The interconnections consist of short flexible
bellows (10.1). The remaining connections are to be blanked off using the blanking
pieces (9.2). The connections components are depicted in Figure 12 using the same
references as in the installation manuals.
Figure 12 – Connection components Dimplex SOLC220 collector
An overall view of the application of the individual connection components is given in
Figure 13 (two collectors, flow left hand side, return right hand side). Note: the sensor
pockets on both collectors face outwards.
Figure 13 – Typical connection of Dimplex SOLC220 collector