Cub Cadet Z-Force S 48 Lawn Mower User Manual


  Open as PDF
of 36
 
29sec ti O n 7 — se r v ic e
Changing the Spindle Assembly
Remove the deck from beneath the tractor, (refer to Deck 
Removal on page 25).
Remove the hex washer screws securing the belt covers 2.
to the deck and remove the belt from the spindle pulleys.


2.
Use a  ⁄
assembly when loosening the hex nut securing the blade.
A block of wood may be placed between the deck housing
and the cutting edge of the blade to help in breaking loose

NOTE: Take note of the order that the parts composing the
assembly are placed.
Using a wrench or socket ratchet remove four hex washer 4.

Reverse the process to install the spindle assembly.5.
Changing the Transmission Drive Belt


Cub Cadet dealer to have the transmission drive belt replaced.
Hex
Washer
Screw
Spacer
Pulley
Hex Screw
Spacer
Spindle Assembly
Spacer
Blade
Flange Lock Nut
Figure 7-12
 previous next