Filter
Top Products
CARTON CONTENTS
The following parts are shipped loose with your pressure
washer:
=' Main Unit-- pressure washer with wheels,
guide handle.
o High Pressure Hose
• Parts Box #1 (which includesitems listed below)
• RotatingBrush
• Vehicle/Boat Wash
® House/Multi-purposeWash
® Parts Box #2(which includes items listedbelow)
o Adjustable Nozzle
,, Turbo Nozzle
,, Spray Gun
,, Nozzle Extension
° Wire Form
Motor Oil
° Manual Bag (which includesthe items listed below)
= Owner's Manual
, Nozzle Cleaning Kit
• "O"-Ring Kit
Become fam']iiar with each piece before assembling the
pressure washer. Check all contents against the illustra-
tion on Page 6. if any parts are missing or damaged, call
the Pressure Washer Helpline at 1-800-222-3136,
TO REMOVE PRESSURE WASHER FROM
CARTON
Remove parts boxes included with pressure washer.
The high pressure hose is Packed in the bottom of the
carton. Remove the hose.
= Slice two corners at handle end of carton from top to
bottom so the panel can be folded down flat.
° Raise handle, secure in place withthe lockingcaps
and roll the pressure washer out the open end of the
carton.
Locking Caps
How TO SET UP YOUR PRESSURE WASHER
For the most part, your Craftsman High Pressure Washer
has been assembledat the factory. You must, however,
attach the wire form, assemble the spray gun, and attach
the high pressure hose to the pump and spray gun.
,, While facing the rear of the Pressure Washer, insert
the wire support with the longer arm positionedon the
left. From this view the hook should resemble a "J".
/
o Cut tie wrap on chemicalinjection tube. Remove chemi-
cal injection filter, thread chemical injec_ontube through
the wire form and reinsert filter into tube.
° Check carton for additional loose parts.