Filter
Top Products
CUSTOMER RESPONSIBILITIES
SERVICE
RECORDS
SCHEDULE
Fill in dates as Mter Before As Every Every Every i Each Before
first2 Each Needed 10 25 Season Storage
fou complete _lour_ Use Plours Hours Hours
regular service
SERVICE
DATES
Tighten All Screws & Nuts i,j
i Lubncate Pivot Points PJ P_
Lubricate Auger Shaft {See
Shear Bolt Replacement _
Lubncate Disc Drive Plate Zerk PJ P_
Check Spark Plug _ p1
Check Engine Oil Level p_ l,j
Change Engine Oil PJ
Check Fuel
Drain Fuel I'j
Check Auger Clutch Cable i I1"
Ad ustment ISee Cable Adi)
Check Traction C utch Cab e
Adjustment ISee Cable Adi) _ it,
Check Drive Belts _ I,f tf
=RODUCT SPECIFICATIONS
HORSE POWER: 12.5 HP
DISPLACEMENT: 21.82 cu. in.
GASOLINE CAPACITY: 4 quart
(unleaded)
OiL (26 oz. Capacity) : 5W-30
;PARK PLUG: Champion RJ19LM
(Gap .030) or
Equivalent
VALVE CLEARANCE: Intake: 0.10 In.
Exhaust: .010 In.
Some adjustments will need to be made pe-
riodically to properly maintain your snow
thrower.
LUBRICATION CHART
Lubricate
Disc Drive
Plate Zerk
with a Hi
Temp EP _,
Moly Grease.
I
GENERAL RECOMMENDATIONS
The warranty on this snow thrower does not
cover items that have been subjected to op-
erator abuse or negligence, To receive full
value from the warranty, the operator must
maintain the snow thrower as instructed in
this manual, The above chart is provided to
assist the operator in propedy maintaining
the snow thrower,
Lubricate the Auger Shaft.
Coat with a clinging type grease
such as Lubriplate or fiber
impregnated grease.
15