Filter
Top Products
• Set the cart right side up on its wheels and place a
corner cap over each front corner of the cart as
shown in figure 13.
CORNER CAPS
FIGURE 13
Positionthe right sidepanel ontop ofthe cartbed
flange and the front comer cap. Align holes in side
panel with holes in corner cap and holes in top of cart
bed flange. Fasten together using two 1/4" x 3/4" hex
botts, two 1/4" flat washers, two 1/4" lock washers and
two 1/4" hex nuts. Repeat on other side. See figure 14.
RIGHT SIDE LEFT SIDE PANEL
PANEL 1
1/4" LOCK
WASHER
1/4" HEX NUT
AssembLefront panel over the ends of the side panels
and on top of the cart bed flange and the comer caps.
Leaving the top holes in the front pane{ empty, fasten
it to the cart body and the side panels using six 1/4"
x 3/4" hex bolts, six 1/4" flat washers, six 1/4" lock
washers and six 1/4" hex nuts. See figure 15.
1/4" FLAT
1/4" LOCK WASHER 1/4" x 3/4"
WASHER HEX BOLT
FRONT
PANEL
FIGURE 15
• Assemble the crossbrace to the two top holes atthe
rear of each side panel using four 1/4" x 3/4" hex
bolts, four 1/4" lock washers and four 1/4" hex nuts.
See figure16.
CROSS 1/4" x 3/4"
BRACE HEX BOLT
1/4" HE)( NUT
I
FIGURE 14
FIGURE 16
10