Filter
Top Products
OilFillPlug
Spark
Muffler Plug
Starter Rope
Grip
Line
Cutting
Blade
Twist & Edge and
Craftsman
Convertible TM Coupler
On/Off Stop
D=Handle Control
Shaft Grip
Cold Weather
Start Lever
Throttle
Control
_l Cap
Shaft
Housing Air Filter Cover Primer Bulb
\
Cutting Attachment
Shield
Hassle-Free TM Plus
!_, ARNING: DO NOT ATTEMPT TO USE THIS
UNIT UNTIL THE D-HANDLE HAS BEEN ROTATED
INTO OPERATING POSITION (Fig. 1).
ADJUSTING THE D-HANDLE
1. Loosen the screws on the D-handle (Fig. 1).
On/Off Stop Control
Shaft
Housing
(4) Screws
Shaft Grip
Minimum 6
(15.24 crn)
D=Handle_
Bottom Clamp
Fig. t
2. While holding the unit in the operating position (Fig. 2),
position the D-handle to the location that provides you the
best grip.
3. Tighten the clamp screws evenly, until the D-handle is
secure.
iNSTALL MNE TRIMMER ATTACHMENT
NOTE: To make installation easier, place the unit on the
ground or on a workbench.
1. Turn knob counterclockwise to
loosen coupler (Fig. 16, p. 9).
2. While firmly holding
attachment, push it straight
into the coupler until the
release button snaps into the
primary hole (Fig. 17, p. 9).
NOTE: Aligning the release button
with the guide recess (Fig.
17, p. 9) will help
installation.
3. Turn the knob clockwise to
tighten.
LINE TRIMMER APPLICATIONS _u_
Cutting grass and light weeds;
edging; and decorative trimming Fig. 2
around trees, fences, etc.