Filter
Top Products
14
CAUTION:
Blade screws must be tightened securely
before operating the fan.
Figure #5
FLYWHEEL
Blade Installation Continued
Step 10b. Attach a blade/blade iron assembly to the
ywheel by using two blade iron screws provided.
Place the end of the blade iron on the ywheel as
shown in Figure #5. Insert the screws one by one
using the provided screwdriver. Tighten securely by
hand only. Repeat for each blade/blade iron assembly
until all ve blades are attached to the fan as shown
in Figure #6.
Figure #6
LIGHT FIXTURE INSTALLATION (OPTIONAL)
NOTE: If you are installing your fan without a light kit attached as below in Figure #1, continue with these installation
instruction Step 11a. If you have purchased a light kit for installation on your fan, skip this section and go to Step
13a on page 18 within this document.
Figure #1