Filter
Top Products
8
LAG SCREW INSTALLATION
CANOPY INSTALLATION
NOTE: This step is required only under two conditions:
If the fan weighs 36 lbs. or more or if the existing ceiling
xture outlet box needs to be modied for a ceiling
fan application (for example, if the house is not new
construction and you are replacing an existing light
xture). We recommend that the ceiling box be of
sufcient capacity to support the weight of the fan and
light xture under any conditions. If in doubt whether
you need to install the lag screw, consult a qualied
electrician.
Step 2. With the large washer attached, pass the lag
screw through the center hole of the ceiling plate and
screw into the guide hole. Tighten until the outlet box is
mounted rmly to the beam. This box must be secured
to the ceiling rmly.
Step 3. Attach the canopy to the ceiling plate with
three of the 8-32 x 2
1
/
2
" long canopy screws and lock
washers provided with your Casablanca fan. Tighten
using the provided screwdriver until snug against
the ceiling.
NOTE: On sloped ceilings, align the canopy opening
with the top or peak of the room.
CANOPY HARDWARE (not to scale)
Canopy
Canopy Hatch
Canopy Screws and (4) Lock Washers
CANOPY
LOCK WASHERS
CANOPY SCREWS
Phillips
Screwdriver