9
Inteli•Touch
®
TheLight-MinderprogramautomaticallyturnsOFFthefanmountedlightsafter
two hours.
To enter the Light-Minder Program:
1. Turn the POWEROFF for at least three seconds.
2. Turn the ON.
3. Immediately operate the buttons in the following sequence:
+ + +
4.Aseriesoftonesindicatesthiscommandhasbeenaccepted.
The fan and light will operate normally using the buttons to turn them on and off.
But, if the lights are left on, they will automatically shut off after two hours. To
canceltheLight-MinderProgram,turnthePOWER off for three seconds.
TheSafe-ExitProgramgivesyouaboutthirtysecondsoflightwhenyouturn
thelightsoff,enablingyoutoexityourhomebeforethelightsgoout.
To enter the Safe-Exit Program:
1. Turn the POWE off for at least three seconds.
2. Turn the POWE on.
3. Immediately operate the buttons in the following sequence:
+ + +
After you hear the confirming audio
tones from the fan - immediately press
4.Thelightswillblinktoindicatethiscommandhasbeenaccepted.
The lights will stay on for twenty seconds and then begin to dim. After a total
of thirty seconds has elapsed, the lights will be off completely. To cancel the
Safe-ExitProgram,turnthePOWE off for three seconds.
The Home-Safe Program makes an unoccupied home appear occupied by turning
the lights on and off at random times.
To enter the Home-Safe Program:
1. Turn the POW off for at least three seconds.
2. Turn the POW on.
3. Immediately operate the buttons in the following sequence:
+ + +
4.Atoneandashinglightindicatethiscommandhasbeenaccepted.
Thisprogramoverridesallmanualcontroloflightsandfan.Thelightswillnowbe
automatically cycled on and off in a controlled sequence as follows: On 1 hour, off
1
/2 hour, on 2 hours, off 1 hour, on
1
/2 hour then off 2 hours.
Thissevenhourpatternwillrepeatcontinuouslysothatadifferentpatternof
lighting is seen each day of the week.
To cancel the Home-Safe Program, turn the POWE off for three seconds.
TheFan-Minderfeaturewilladdtoyourcomfortwhenusedinthebedroom.Theprogramreducesthe
speedofthefaneachtwo-hourintervaltocompensateforthecoolingnightair.
To enter the Fan-Minder Program:
1. Turn the POWE off for at least three seconds.
2. Turn the POWE on.
3. Immediately operate the buttons in the following sequence:
+ + +
4.Thefancontrollerwillrespondwiththreedescendingtones.Atimerisnowinitiatedandthefan
willreduceonespeedforeachtwo-hourinterval.Thefanwillnot,however,descendbelowthe
second lowest speed.
TocanceltheFan-MinderProgram,turnthePOWE off for three seconds. You may increase the fan
speed by pressing and holding the button until the desired speed is reached, then release
it.Thefanwillagainreduceonespeedforeach2hourinterval.
Note: Both Light-Minder and Safe-Exit
programs can run at the same time,
however the dimmer cannot be used,
the light may only be turned ON/OFF.
FAN
INTELI•TOUCH OPERATION
LIGHT-MINDER PROGRAM
INTELI•TOUCH OPERATION
SAFE-EXIT PROGRAM
INTELI•TOUCH OPERATION
FAN-MINDER
®
PROGRAM
INTELI•TOUCH OPERATION
HOME-SAFE
®
PROGRAM
POWER
FAN
FAN
LIGHT
LIGHT
POWER
POWER
FAN
FAN
LIGHTLIGHT
LIGHT
POWER
POWER
POWER
LIGHTLIGHT
FAN
FAN
POWER
POWER
POWER
LIGHT
LIGHT
FANFAN
FAN
POWER
POWER
R