4
CAUTION: To reduce the risk of
personal injury, use only the
mounting hardware provided with
the approved outlet box to install
the crossbar mounting bracket.
CROSSBAR MOUNTING BRACKET INSTALLATION
CEILING
WIRING
CROSSBAR
MOUNTING
BRACKET
FLAT
GREEN
GROUND
WIRE
CEILING FAN
WIRING BOX
RIDGE
SIDE
DOWN
CANOPY INSTALLATION
SCREW
CROSSBAR
MOUNTING
BRACKET
CANOPY HARDWARE
OUTLET BOX
NOTE: On sloped ceilings, align the
canopy opening towards the top or
room peak.
Step 1.Routethewiresfromtheceilingoutletboxthrough
the crossbar mounting bracket center hole. Attach the
bracket, with ground wire and ridges down, to the ceiling
xtureoutletboxwiththemountinghardwareincludedwith
theoutletbox.
Tighten the screws firmly by hand only, being careful not to
bendthebracketbyovertightening.
Step 2. Attach the canopy to the crossbar mount-
ingbracketwiththreeofthe8-32x2
1
/4″ long
canopy screws and canopy lock washers.
Tighten the screw firmly by hand only.