Casablanca Fan Company 3211Z Outdoor Ceiling Fan User Manual


  Open as PDF
of 17
 
6
Step 4. To hang the fan body in the canopy, support the
fan at the center of the glass holder and top support and
insert the ball into the canopy opening. Rotate the fan

canopy opening.
HANGING FAN BODY IN CANOPY
BLADE
HOLDER
BLADE
TIP
BLADE
ATTACHING THE BLADES
BALL
SLOT
PIN
GLASS
HOLDER
INSIDE
TOP SUPPORT
Step 3a. Attach the 5 blade tips to the blades using two
6-32x
1
8
” round head screws provided. Note: the screws
have locktite on them, so once they are installed it will

Step 3b.    

washers provided for each blade. The truss head screw

pressed on so that it is between the blade and blade
holder; see the detail drawing below. Hand tighten each

CANOPY ELECTRICAL CONNECTORS
WHITE WIRES
(2)
BLACK WIRES
(2)
GREEN WIRES
(3)
WIRE NUT
Step 5.
box wiring by twisting the bare ends of the wires together
and securing with a wire nut. Connect in this order:
        

wire nut.
 

 

Note: Write down the
Serial Number and
the model number for
future reference.
3b - BLADE INSTALLATION:
BLADE
BLADE TIP
6-32x
1
⁄
8
”
ROUND
HEAD
SCREW
BLADE
BLADE TIP
6-32x
1
⁄
8
”
ROUND HEAD
SCREW
3a - BLADE TIP INSTALLATION:
TRUSS HEAD
BLADEHOLDER
SCREW
BLADE
BLADE-
HOLDER
FIBER
WASHER
Note: Fan Weight is 33 lbs.
 previous next