Filter
Top Products
14
®
3
OPERATION HOME-SAFE
®
PROGRAM
The Home-Safe Program makes an unoccupied home appear occupied by turning
the lights on and off at random times.
To enter the Home-Safe Program:
But-
ton off for a least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence:
+ + + . A series of tones will be heard through the
follow. This program overrides all manual control of lights and fan. Once the lights
turn on, they will automatically turn off after 2 hours.
3) The lights will automatically cycle on and off in a controlled sequence as follows:
ON 1 hour, OFF ½ hour, ON 2 hours, OFF 1 hour, ON ½ hour then OFF 2 hours.
This seven hour pattern will repeat continuously so that a different pattern of lighting
is seen each day of the week.
4) To cancel the Home-Safe Program, press the
seconds.
OPERATION SAFE-EXIT
®
AND LIGHT-MINDER
®
PROGRAM
NOTE:
hours.
To enter the Light-Minder Program:
button off for at
least 5 seconds.
2) Turn the on. Immediately press the buttons in the following sequence:
+ + + . A series of tones will be heard through the piezo-
buzzer indicating the command has been accepted. Once the lights turn on, they will
automatically turn off after 2 hours.
3) Light operation still remains normal, if you leave the room and turn OFF the lights
will blink to indicate this Safe-Exit command has been accepted. The lights will stay
on for 30 seconds and then begin to dim. After thirty seconds have elapsed, the lights
will turn completely off.
button.
The Safe-Exit Program gives you about thirty seconds of light when you turn the lights off,
enabling you to exit your home before the lights go out. To enter the Safe-Exit Program:
button off for at
2) Turn the Power on. Immediately press the buttons in the following sequence:
+ + + . Immediately press the Button after an audio tone
is heard from the fan controller. The lights will blink to indicate this command has been
accepted. The lights will stay on for 30 seconds and then begin to dim. After thirty
seconds have elapsed, the lights will turn completely off.
3) To cancel the Safe-Exit Program, press the
NOTE: If the lights are left on in the room, the lights will automatically turn
Safe-Exit