Cal Spas LTR20111000 Hot Tub User Manual


 
2011 Portable Spa
LTR20111000, Rev. D
Water Clarity
www.calspas.com
30
Maintenance Schedule
Each time you rell the spa
Follow the section “Starting the Spa with Fresh Water” on page 9.
Prior to each use Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
Once a week Test the spa water using either test strips a reagent test kit. Adjust
chemical levels as necessary.
If your water source is high in calcium, add stain and scale
preventer.
Once a month Deep clean your spa’s lter. (Follow lter cleaning instruction at
beginning of this section)
Every two to four months Drain and clean your spa with a multi-purpose cleaner for spas.
Polish the acrylic surface with a surface protectant for spas.
Clean and treat spa cover, pillows, and Cal Select cabinet (if
equipped) with a vinyl cleaner for spas.
Rell your spa, following the section “Starting the Spa with Fresh
Water” on page 9.
If you are using the Cal Clarity II Automatic Bromine Generator, add
new sodium bromide to the water.
Once a year Replace lter cartridges if the pleats appear frayed.
If you use an ozonator, you will need to replace the ozone
cartridge.
If you use the Cal Pure UV water sanitizer, you will need to replace
the UV lamp.
We recommend that your spa water be changed every 4 to 6 months. You may nd the need to change your
spa water more frequently with heavy use. When empty, your spa should be cleaned with a non-abrasive
cleaner and then rinsed thoroughly.