Filter
Top Products
Page 8 2007 Woodcrest Series Gazebo Owner’s Manual
LTR20071040, Rev. A
Savannah Rectangle Gazebo Assembly
Step 2: Roof Frame Assembly
When assembling the roof frame, it is recommended that you lay everything out and assemble it on a fl at surface.
It is also recommended that there be another person available when installing the roof frame on to the gazebo
walls.
Check the parts list that came with your gazebo and make sure that all the parts are present. Also, please follow
the written steps in conjunction with the fi gures that are shown.
Take the gable ends and attach together using drywall screws (Figure A). Use the toe-in method for
attachment.
Stand each gable end up and place about 6’ apart.
Take two 2”x4”x67” common rafters and attach
them to both gable ends (Figure B). This will keep
the roof frame assembly stable while completing
the assembly process.
Attach two rafter boards at the ends of the gable
roof assembly (Figure B).
Take four common rafters and attach them to their
corresponding locations (as shown in Figure B).
Make sure that each common rafter is spaced
equally apart.
Using the provided drywall screws, attach the
corbels (Figure B).
Repeat these steps until
the roof frame assembly is
complete.
1.
2.
3.
4.
5.
6.
7.