Filter
Top Products
23
From the previous step’s Root Directory screen, use the pull down menu and click Tools and then
select Map Network Drive. The Map Network Drive program will run. Select the drive letter you
would like LinkStation to assume from the Drive: pull down menu. Enter the \\LinkStation_
Name\share_name in the Folder: eld (where LinkStation_Name is the LinkStation Name set on
page 18 and share_name is the Shared Folder Name set on page 20). You can also browse for the
shared folder by pressing the Browse button and searching through the Entire Network and then
the Microsoft Windows Network. Check the Reconnect at logon checkbox to create this mapped
drive everytime Windows starts. Once complete, press the Finish button. LinkStation is now
mapped to a drive letter.
Accessing LinkStation Data from a PC
NOTE: If errors occur while mapping multiple
drive shares, see page 76 for help.