Filter
Top Products
3
Features
& Controls
TRACTOR CONTROLS
Before you begin operating the tractor with the dozer
blade attachment, make certain you have:
• Read and understood the instructions in the
tractor Operator’s Manual.
• Become thoroughly familiar with all of the
tractor controls and their operation, including
how to safely and properly start and stop the
unit.
• Practice driving in an open area—without doz-
ing—to become accustomed to the unit.
A. Blade Angle Control Lever
The blade angle release lever controls a spring-loaded
plate which locks the blade in one of three positions.
Turn the lever counterclockwise to release the angling
mechanism and move the blade left or right. Push the
angling lever forward fully to lock the blade in the left
position. Pull the lever fully back to lock the blade in the
right position. Move the lever slowly past center to lock
in the centered position.
NOTE: It is easier to change the angle of the blade with
the attachment raised.
B. Attachment Lift
The attachment lift lever raises and lowers the dozer
blade. To RAISE attachment pull back on lever. To
LOWER an attachment, move the lever forward.
Please Take a moment and
familiarize yourself with the
name, location, and function
of these controls so that you
will better understand the safe-
ty and operating instructions
provided in this manual.
Figure 1. Control Locations
A. Blade Angle Control Lever
B. Attachment Lift
CONTROL FUNCTIONS
The information below briefly describes the
function of individual controls. Operating the
tractor and dozer require the combined use of
these controls and additional controls whose
operation is described in the tractor Operator’s
Manual.
A
B