Filter
Top Products
5
SYMBOL MEANING
• SAFETY ALERT SYMBOL
Indicates danger, warning or caution.
May be used in conjunction with other
symbols or pictographs.
•WARNING - READ
OPERATOR'S MANUAL
Read the operator’s manual(s) and follow
all warnings and safety instructions.
Failure to do so can result in serious
injury to the operator and/or bystanders.
•WEAR EYE AND HEARING
PROTECTION
WARNING: Thrown objects and loud
noise can cause severe eye injury and
hearing loss. Wear eye protection
meeting ANSI Z87.1 standards and ear
protection when operating this unit. Use
a full face shield when needed.
• KEEP BYSTANDERS AWAY
WARNING: Keep all bystanders,
especially children and pets, at least 50
feet (15 m) from the operating area.
• UNLEADED FUEL
Always use clean, fresh unleaded fuel.
•OIL
Refer to operator's manual for the proper
type of oil.
• THROWN OBJECTS AND ROTATING
CUTTER CAN CAUSE SEVERE
INJURY
WARNING: Do not operate without the
proper attachments and guards in place.
Keep away from the rotating tines.
SYMBOL MEANING
• ON/OFF STOP CONTROL
ON / START / RUN
• ON/OFF STOP CONTROL
OFF or STOP
•HOT SURFACE WARNING
Do not touch a hot muffler, gear housing
or cylinder. You may get burned. These
parts get extremely hot from operation.
They remain hot for a short time after the
unit is turned off.
• CHOKE CONTROL
A • FULL choke position.
B • PARTIAL choke position.
C • RUN position.
• GARDEN CULTIVATORS – ROTATING
TINES CAN CAUSE SEVERE INJURY
WARNING: Stop the engine and allow
the tines to stop before installing or
removing tines, or before cleaning or
performing any maintenance. Keep
hands and feet away from rotating tines.
• NO STEP
Always keep proper footing and balance.
Do not overreach, take extra care when
working on steep slopes or inclines.
•PLACE LEFT FOOT HERE
Avoid accidental starting. Stand in the
starting position whenever pulling the
starter rope. The operator and unit must
be in a stable position while starting.
SAFETY AND INTERNATIONAL SYMBOLS
This operator's manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator's manual for complete safety, assembly, operating and maintenance and repair information.
RULES FOR SAFE OPERATION