Filter
Top Products
18
370406 F103104A
After switching on the engine following the instructions given in the previous paragraph:
1. Move the gear lever ( fig. 2) to the 1st speed position.
WARNING
If the gear engages with difficulty, partially engage the clutch for an instant before trying to
engage the gear again.
2. Engage the blade control level using the relative lever ( Fig. 1, ref. A).
WARNING
Choose a cutting height suitable for the type of terrain the machine is to be used on.
3. To move the machine, accelerate and then engage the forward clutch using the relative
lever (Fig. 1, ref. C).
4. To select a different gear the forward clutch and the blade clutch must first be
disengaged by releasing their levers (Fig. 1, ref. C and Fig. 1, ref. A). Then select the
desired FORWARD position (1°- 2°, in fig. 2) using the gear lever (Fig. 2), then re-
engage the forward clutch control lever (Fig. 1, ref. C) to set the machine in motion
again.
5. To stop the blade release the relative lever ( Fig. 1 ref. A).
6. To stop forward movement of the machine release the relative lever ( Fig. 1, ref. C),
then switch off the engine by moving the switch to the position (O) (Fig. 1, ref. I).
DRIVING THE MACHINE
WARNING
When using the machine for the first time it is advisable to get the feel of it by executing
manoeuvres on flat ground free of foreign objects.