Filter
Top Products
10
370406 F103104A
6. CONTROL AND ADJUSTMENTS
A) BLADE CLUTCH CONTROL LEVER
This is used to engage and disengage the blade movement. Lowering the lever engages
the clutch and releasing it disengages the clutch.
WARNING
The blade will continue to move if the engine is running and the blade clutch is engaged,
regardless of the position of the forward clutch.
B) ACCELERATOR CONTROL LEVER
This is used to adjust the number of engine revolutions according to the operations to be
carried out. Hence at switch on the lever will be positioned on the minimum setting whilst
during work operations it will be positioned as required by use.
C) FORWARD CLUTCH CONTROL LEVER
This lever only has two positions: engage and disengage. Lowering the lever engages
the clutch and releasing it disengages the clutch.
This lever automatically operates the service brake: when released the lever engages the
brake, when engaged the lever disengages the brake.
Figure 2
D) CUTTING HEIGHT ADJUSTMENT LEVER
This lever serves to adjust the cutting height according to the type of terrain and the
thickness of the turf to be cut. (Fig.2 Ref. A)
F) COVER
The cover ( Fig. 1, ref. F) prevents any contact with the moving parts of the machine. Use
of the machine without the said cover is strictly prohibited.