Filter
Top Products
11
370406 F103104A
I) ON SWITCH
Two-position switch:
(1) for starting the engine
(0) for switching off the engine
L) FORWARD-NEUTRAL GEAR SELECTOR LEVER
This lever selects the gear forward (1st, 2nd) or neutral.
WARNING
Select the required gear only after disengaging the forward clutch by releasing the relative
lever (Fig. 1, ref. C).
7. ASSEMBLY INSTRUCTIONS FOR THE HANDLEBARS AND
END PART OF THE CUTTING HEIGHT ADJUSTMENT LEVER
The turf cutter is delivered with the handlebars and the end part of the cutting height
adjustment lever disassembled. Remove the cardboard packaging (to be disposed of in
an appropriate manner, in accordance with current regulations in force).
To assemble proceed as follows :
Lift the handlebar (Fig. 3 Rif. C) and insert it in the supports shown in Fig. 3 rif. E.
Select the required cutting height and secure the setting using the screws provided
(Fig. 3 ref. D).
Fit the end part of the cutting height adjustment lever (Fig. 3 Ref. A) into its relative
support (Fig. 3 ref. F) and secure using the screw provided (Fig. 3 Ref.B).
Figure 3
Before switching on ensure that the machine has been fully assembled correctly.