Filter
Top Products
14
370406 F103104A
WARNING
During operation the lawn and turf are cut into strips. Should the cutter's wheels skid
during use it is advisable to adjust the cutting height using the special lever (Fig. 3, ref.A).
If this operation does not prevent this occurence check the state of the terrain. If it is too
dry it should be wetted so that the blade encounters a slight resistance, thus making
cutting operations easier.
WARNING
When working in a stony or obstacle-riddled area try to remove as many objects as possible
before commencing cutting. Then work at a greater cutting height than usual.
WARNING
Stones and other objects may be thrown outwards in direction of the perator or of other
persons in the vicinity. Keep at a safe distance from persons, nimals and objects.
If the cutting mechanism accidentally comes into contact with an object (stump or
stone), switch off the engine and carry out the following operations:
- Inspect the damage
- Do not attempt to repair it if unskilled to do so
- Check that no parts have come loose
Do not use the machine if it does not work properly or is broken: seek authorized
service.
It is strictly prohibited to leave the turf cutter running whilst unsupervised.
It is strictly prohibited to transport the machine with the engine running. When loading
the machine onto a vehicle, the inclination of the ramps must not exceed 15°.
WARNING
EXERCISE CAUTION WITH GRADIENTS. Danger of machine overturning.
Given its outdoor use, it is advisable not to use the turf cutter when it is raining.
The area next to the engine exhaust may reach a high temperature.
WARNING
Danger of burns.
Do not go near water fountains or precipices and do not cross narrow bridges during
work operations to prevent the risk of falling.
Do not work on steep banks.
In the instance of difficulty or emergency stop simply release the forward clutch control
and blade movement levers and return the gear lever to neutral position.
Work on flat ground for the utmost safety.