Anritsu MW9076 Telescope User Manual


 
8
High-Speed Measurement
Full Automatic Mode
Measurement results are displayed by simply pressing the
Start key. All complicated settings of distance range, pulse
width, attenuator, and marker can be automatically executed.
Measurement speed in this mode was significantly increased.
When the wavelengths are set to ALL, wavelengths are auto-
matically changed.
Power on
Connect to optical fiber
Start key
Auto setting
Averaging
Auto search
Event table display
Auto execute
10 s (min)
Event table
Repeated Measurement
A series of operations, such as measurement, wavelength
switching, data saving, optical channel switching, and next
optical fiber measurement, can be executed automatically
under preset measurement conditions. This mode is ideal for
measuring a multi-core optical fiber.
Repeating automatic execution
Saving and printing measurement data
Switching channel
Measuring 1.55 µm wavelength
and creating event table
Measuring 1.31 µm wavelength
and creating event table
Measuring (Full Auto) first fiber
Event fix
Repeat measurement conditions set
Saving and printing measurement dataSaving and printing measurement data
Repeat measurement log table
Event table (wavelength: ALL)