Anritsu MW9076 Telescope User Manual


 
Report Output
The event table of a specified file is analyzed and the printed
automatically. It is also possible to print multiple waveforms
on one page. In particular, at both ends measurement, the
measurement results for both ends can be output automati-
cally in a report. In addition, the report can be saved as the
Excel file.
Chromatic Dispersion Measurement Mode
This mode is used for chromatic dispersion measurements
made by the MW9076D1. Chromatic dispersion measure-
ments are performed by using slight differences in event posi-
tions for each waveform. The delay, chromatic dispersion,
and dispersion slope can be obtained easily by selecting the
dispersion approximation equation after the event position is
set.
12