Anritsu MW9076 Telescope User Manual


 
11
Both-End Measurement Function
A new waveform can be composed by averaging data mea-
sured at both ends of an optical fiber.
Data Transmission Function
Data files recorded by the MW9076 series can be transferred to
a PC via the RS-232C port.
Emulation Function
Measured waveform data can be analyzed using a PC.
MX907600A OTDR Emulation Software
PCMW9076 Series
Data files
RS-232C
The MX907600A is emulation software for the MW9076 series; it runs under Windows
, and is used to analyze data measured at
fiber installation, maintenance and repair on a personal computer.
Windows
®
95, Windows
®
98, Windows
®
Millennium Edition, Windows NT4.0
®
Workstation 4.0, Windows
®
2000 Professional
Waveform Difference Display Function
When two wavelengths are chosen from waveforms read in
the emulation mode, the difference between these two wave-
forms is displayed in another window, permitting easy com-
parison of aging changes in optical fibers.
Multi-Fiber Measurement Mode
This mode is useful for comparing and measuring several
waveforms under the same conditions, such as when mea-
suring a multi-fiber, or when measuring aging change in the
same fiber. A maximum of 200 waveforms can be displayed
simultaneously. The measurement mode, event/marker posi-
tions, event comments, IOR, and waveforms display positions
can be changed for all waveforms as a group.