Filter
Top Products
10
● Light Source, Power Meter
Optical fiber loss can be measured using the optical power
meter function and light source function. Two types of optical
power meters are supported: One is measurement range of
–70 to +3 dBm (MW9076B/B1/C-02 option), the other is
measurement range of –50 to +23 dBm (MW9076B/B1/C-03
option).
● VGA Output Terminal, Keyboad
The VGA connector outputs the screen interface to a CRT mon-
itor, which is very useful for production-line applications.
Number of data points: 5,000
∗The hard disk is for the PC card slot (IBM Microdrive DSCM-11000 + PC card adapter)
● Large Internal Memory
About 18 MB internal memory is provided as standard.
The following table shows the number of waveforms which can
be saved in each media.
● Loss Table Display
The results measured with an optical power meter can be
listed in a loss table for data comparison. Data in a loss table
can be saved in text format.
Media GR196 Analysis
FDD (1.4 MB) 123 67
PC-ATA card (32 MB) 2700 1520
PC-ATA card (256 MB) 16000 10600
Internal memory (18 MB) 1560 860
Hard disk (1 GB)
∗
32700 32700
● Visible LD
A 635 nm visible LD option is available for the detection of
breaks and loss points along the fiber to be measured.
Display
MW9076 Series
Keyboard