Filter
Top Products
16
● MU250000A/A1/A4 Display Unit
MU250000A Unit:
8.4 inch color, TFT-LCD (640 × 480 pixels,
transparent type, with back light)
Display
MU250000A1 Unit:
7.2 inch color, STN-LCD (640 × 480 pixels,
semi-transparent type, with back light on/off)
MU250000A4 Unit:
7.8 inch color, STN-LCD (640 x 480 pixels,
reflective type, with front light on/off)
Serial interface:
RS-232C-1 (115.2 kbps max.), with D-sub 9-pin connector
RS-232C-2 (57.6 kbps max, ), with mini-DIN 8-pin
connector
Printer interface:
8-bit parallel interface (Centronics), with D-sub
Interface
25-pin connector
Keyboard interface:
IBM US ENGLISH (101 keys) 106 keys compatible,
with mini-DIN 6-pin connector
VGA output connector: Mini-DIN 10-pin connector
FDD Built-in 3.5 inch (1.44 MB/720 KB)
10 to 26.4 Vdc
100 to 250 Vac (rated), 50/60 Hz, ≤50 VA max.
Power supply (Specific AC adapter is used.)
Battery: CGR-B/802D Lithium ion battery pack can be
used. (Mounted in main frame)
Power ≤35 W
Dimensions and
290 (W) x 194 (H) x 45 (D) mm, ≤1.9 kg
mass
Restricted by memory card specifications when a
memory card is mounted.
AC adapter: Depend on the conditions of AC adapter
Operation temperature and humidity:
–10° to +40°C, ≤85% (no condensation),
Environmental
+5° to +40°C, ≤80% (FDD is used.)
conditions
Storage temperature and humidity:
–20° to 60°C, ≤85%
Vibration: Conform to MIL-T-28800E Class 3
Shock: 76 cm height, 6 surfaces, 8 corners*
1
Dust proofing: Conform to MIL-T-28800E
Drip proofing: Conform to MIL-T-28800E
EMC Same as MW9076 series
LVD Same as MW9076 series
● Battery pack: CGR-B/802D
Battery Lithium ion secondary battery
Voltage, capacity 14.4 V, 2550 mAh (36.72 Wh)
Continuous
See the MW9076 series specifications
drive time
Charging time ≤3 h
Dimensions
134.5 (W) × 89.5 (H) × 20.5 (D) mm, ≤390 g
and mass
● AC adapter: ADP60WB24.0
Rated AC input 100 to 240 Vac, 50/60 Hz
Rated DC output 24 Vdc, 2.5 A
Dimensions
109.5 × 62.5 × 31 mm, ≤350 g
and mass
Safety
UL, CSA, TUV, CE, AS
specifications
Environmental Operating temperature and humidity: 0° to +40°C, 80%
conditions Storage temperature and humidity: –20° to +80°C, 90%
● Visible LD: MW9076B/B1/C/D1/J/K-01
Central
635 ±15 nm (at 25°C)
wavelength
Optical output –3.0 ±1.5 dBm
Output optical
10/125 µm, SM (ITU-T G.652)
fiber
Optical
FC, SC, ST, DIN, DIAMOND (HMS-10/A) ∗Replaceable
connector
Optical safety IEC Pub. 60825-1 Class 2, 21CFR Class 2
Environmental
Same as MW9076 series
conditions
EMC Same as MW9076 series
LVD Same as MW9076 series
Safety measures for laser products
This option complies with optical safety standards in Class 2 of the IEC pub. 60825-1
and the FDA (21CFR1040.10, USA); the following descriptive labels are affixed
to the product (FDA label is only affixed to product for export to the USA).
The maximum output is indicated under ∗1, and the wavelength under ∗2.
Caution: Do not look directly into the laser beam.
● Optical power meter:
MW9076B/B1/C-02, MW0976B/B1/C-03
Applicable
10/125 µm, SM (ITU-T G.652)
optical fiber
Optical connector FC, SC, ST, DIN, DIAMOND (HMS-10/A) ∗Replaceable
Wavelength range 1.2 to 1.7 µm
Option 02:
+3 to –70 dBm (continuous light)
Measurement +0 to –73 dBm (modulated light)
range Option 03:
+23 to –50 dBm (continuous light)
+20 to –53 dBm (modulated light)
Option 02:
Measurement ±5% (–30 dBm, 1.31/1.55 µm, continuous light)
accuracy Option 03:
±5% (–10 dBm, 1.31/1.55 µm, continuous light)
Return loss ≥36dB (1.55 ±0.02 µm)
Environmental
Same as MW9076 series
conditions
EMC Same as MW9076 series
LVD Same as MW9076 series
● MU960001A/960002A Optical Channel Selector
Model MU960001A MU960002A
Configuration 1 × 41 × 8
Wavelength 1.2 to 1.65 µm (The specified wavelengths are
range 1.31/1.55 µm.)
Optical fiber 10/125 µm, SM (ITU-T G.652)
Optical connector FC, SC, ST, DIN, HMS-10/A ∗Replaceable
Insertion loss ≤2.5 dB ≤4.5 dB
Environmental
Same as MW9076 series (not applicable to the shock)
conditions
Dimensions 290 (W) x 194 (H) x 47 (D) mm
Mass ≤1.5 kg ≤2.0 kg
EMC Same as MW9076 series
LVD Same as MW9076 series
IEC FDA (CFR)
∗1 ∗2
∗1
∗2
∗MU960001A/MU960002A can not be attached to MW9076D1.
∗1 Dropped on the floor of plywood thickness 5 cm fixed by concrete
..