Filter
Top Products
OPERATION
Versa 03/09 Operation Section 3-3
© 2009 Alamo Group Inc.
OPERATION
FLAIL-AXE
®
Width of Cut: 48"
Cutter Shaft: 4-1/2" dia. steel tube, 3/8" wall,
greasable bearings
Knives: 16 ea., 2 pound, 360 deg. swing,
reversible
Hyd. Motor Rating: Gear Type, 76 HP (a) 3000 PSI @ 2400 RPM
Deck Thickness:10-gauge
End Plates: 3/8"
Deck Frame: 4" square cross-tube
Skid Shoes: Full-length, replaceable
Rear Roller: 5-1/2" dia. tube, adj. 3/4" to 6"
Debris Deflector:
Full-width rubber-covered fabric, rear.
Removable full-width steel, front.
BUZZBAR
®
TREE LIMB CUTTER
Cutting Width: 7-1/2"
Blades: Four blades, each 26" in diameter
and 3/16" thick
Cuts up to 4" diameter tree limbs
Hydraulic Motor: 38 HP
Main Channel: Formed of 3/16" sheet steel
End Plates: 3/8"
Roller Bearings: Tapered with factory set pre-load
Rear Shield: 10-gauge steel formed for stiffness
TIMBER CAT
®
SICKLE BAR
Cuts up to 4" tree limbs
Width of Cut: 5' or 7'
Blade Bar 5/8" thick
Blade: T-l steel
Direct coupled operating hydraulic cylinder
{excludes pitman).
HEAVY DUTY GRASS FLAIL
Width of Cut: 48" or 60"
Cuttershaft: 4-1/2" balanced tube, greasable bearings
Knives: 36 pair of 3 o/. knives are standard
Hyd. Motor Rating: Gear Type 76 HP @ 3000 PSI @ 2400 RPM
Deck Thickness: 10- gauge
End Plates: 1/4" thick
Deck Frame: 2-7/8" tube, full-width front & rear
Skid Shoes: Full-length, replaceable
Rear Roller: 6" tube greased bearings
Debris Deflector: Full-width, rubber -covered fabric, rear
BOOM-AXE*
Widths of Cut: 60" std., 50" opt.
Blade Bar: 60"-3 leaf 5"x 7/8"(up to 6 blades.)
50"-3/4" x 29" disc.(up to 6 blades.)
Blades: 60"-5"xl4"x5/8"replaceable.
Hyd. Motor Rating: Gear Type 101 HP @
2750 PSI @ 2400 RPM
Deck Thickness: 10 gauge