Filter
Top Products
MAINTENANCE
FALCON 15/10 03/09 Maintenance Section 5-4
© 2009 Alamo Group Inc.
MAINTENANCE
WHEEL HUB ASSEMBLY
The Wheel Hub Assemblies need to be lubricated on a weekly
basis.
Tongue
The Tongue Hitch Pins attach the Tongue to the Center Section and should be checked for signs of wear or
cracking. Replace as needed. The Drawbar 1" Bolt fastens the mower to the tractor Drawbar. When the
mower is unhitched and this 1" Bolt is removed, examine for signs of cracking or wear. Replace the Drawbar
1" Bolt at first sign of either problem.
The unit is designed to greatly reduce the
clipping and debris build up on the cooler.
However the cooler will periodically need to be
inspected and cleaned to remove material,
usually once or twice a day depending on
mowing conditions. Use a short brush to brush
the clippings off the cooler fins on the underside.
Brush the clippings out from under the tank
where the air enters the cooler. Remove any
debris or clippings from the top of the fan as
needed. If the cooler becomes excessively
clogged, the oil temperature could become too
high.