Filter
Top Products
MAINTENANCE
FALCON 15/10 03/09 Maintenance Section 5-2
© 2009 Alamo Group Inc.
MAINTENANCE
DAILY MAINTENANCE
Daily maintenance is intended for those that need to be lubricated and/or checked daily for proper mower
operation. This maintenance should be conducted every morning before the machine is started.
NOTE: Please make copies of this chart and use daily.
ITEM
DAY
M T W T F
A. HYDRAULIC FLUID
1. Proper Oil Level
2. Oil Level Low
3. Filter Change
B. BLADES
C. SPINDLE
D. NUTS AND BOLTS
1. Blade Bolts
2. Blade Carrier Nut & Cotter
3. Spindle Housing Bolts
4. Motor Bolts
5. Speed Changer Bolts
6. Pump Bolts
7. Axle Arm Bolts
8. Winch Stand Bolts
9. Drawbar Bolts
10. Wheel Lug Nuts
E. WHEEL BEARING SEAL INSPECTION
F. HYDRAULIC HOSES AND CYLINDERS
G. CLEAN OFF MACHINE
H. OIL COOLER CLEAN (Every 4 to 8 hours)