Filter
Top Products
OPERATION
FACLON 15/10 03/09 Operation Section 4-19
© 2009 Alamo Group Inc.
OPERATION
HYDRAULI
C
LINE IN
S
PE
C
TI
O
N
• Check for hydraulic leaks along hoses,
cylinders and fittings. IMPORTANT: DO NOT
use your hands to check for oil leaks. Use a
piece of heavy paper or cardboard to check for
hydraulic oil leaks.
• Inspect the condition of the valve weldment.
• Ensure fitting is properly connected
• Inspect condition of nylon bushings.
• Inspect Hoses attached between moving points
for kinking, pinching, or twisting damage.
OPS-B- 0094
Hydraulic Hoses
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil
and fuel are explosive and their presence could present a hazard. Do
not check for leaks with your hand! High-pressure oil streams from
breaks in the line could penetrate the skin and cause tissue damage
including gangrene. To check for a hose leak, SHUT the unit ENGINE
OFF and remove all hydraulic pressure. Wear oil impenetrable gloves,
safety glasses and use Cardboard to check for evidence of oil leaks. If
you suspect a leak, REMOVE the HOSE and have it tested at a Dealer.
If oil does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure.
(SG-15)
S
PEAD IN
C
REA
S
ER AND HYDRAULI
C
PUMP IN
S
PE
C
TI
O
N
• Check for hydraulic leaks along hose
connections and fittings. IMPORTANT: DO
NOT use your hands to check for oil leaks. Use
a piece of heavy paper or cardboard to check
for hydraulic oil leaks.
• Ensure hdyraulic pump and spead increaser
are properly connected to tractor.
• Inspect all hardware is properly torqued
• Ensure Hydraulic hoses and fittings are
properly connected.
• Inspect all hoses for kinking, pinching or
twisting damage.
OPS-R- 0095
Hydraulic Hoses
Hydraulic Pump
Spead Increaser