Filter
Top Products
INTRODUCTION
A84B 03/07 Introduction Section 2-3
© 2007 Alamo Group Inc.
INTRODUCTION
These mowers are available in lift-type and pull-type. These rugged Mowers are designed for medium-duty
work. They can mow pastures, cut brush up to 2" in diameter, and control grass and weeds on highways or
industrial sites.
For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly
recommends the use of Chain Guards or Rubber Deflectors for Agricultural purposes as
well, to reduce the risk of property damage, serious bodily injury, or even death from objects
thrown out by or from contact with the Cutting Blades.
The 84" Lift Type machine requires a minimum of 60 HP with adequate front end weight.
At least 20% or the tractor’s weight must be on the front tires with the Mower lifted to provide
adequate traction for safe steering under good conditions. Slow down on hills, rough
terrain, and curves.
The front, rear, left, and right are determined by the normal direction of travel, the same as driving an
automobile