Filter
Top Products
INTRODUCTION
60C 01/10 Introduction Section 2-3
© 2010 Alamo Group Inc.
INTRODUCTION
SPECIFICATIONS
Specifications may vary depending on tractor model, tire size and bucket used and are subject to change without
notification. Tractor must be equipped with ROPS and seat belt that will provide greater safety and installation of backhoe
subframe.
GENERAL DATA
A. Digging Depth (two foot flat bottom)...............................................72.5”
B. Reach from center line of Swing Pivot............................................101”
C. Loading Height (bucket at 60°).......................................................59”
D. Swing Arc .......................................................................................150°
E. Transport Height (maximum)..........................................................65”
F. Transport Overhang........................................................................40”
G. Bucket Rotation ..............................................................................180°
H. Stabilizer Spread, down position.....................................................76”
I. Stabilizer Spread, up position .........................................................49”
J. Backhoe Weight..............................................................................625 lbs.
K. Shipping Weight (less bucket)........................................................700 lbs.
BUCKET DATA
BUCKET WIDTH SAE STRUCK CAPACITY SAE HEAPED CAPACITY
9” 0.48 cu. ft. 0.54 cu. ft.
12” 1.65 cu. ft. 0.75 cu. ft.
16” 1.88 cu. ft. 1.03 cu. ft.
CYLINDER DATA
CYLINDER PISTON DIA. STROKE RETRACTED EXTENDED ROD DIA.
LENGTH LENGTH
Boom 2.5” 12.37” 20.44” 32.82” 1.375”
Dipperstick 2.5” 12.01” 20.25” 32.26” 1.375”
Bucket 2.25” 13.87” 21.25” 35.12 1.375”
Swing 2.5” 8” 15.22” 23.22” 1.375”
Stabilizer 2.25” 10.66” 17.44” 28.09” 1.375”