Filter
Top Products
Installation
25
F8208301
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
4. Use rebar or other appropriate material to ensure
that the concrete foundation will be sufficiently
connected to the existing floor.
5. If desired, prepare a form for the above-ground
portion of the foundation and fill form and
excavation with concrete to join the foundation.
Verify that top of foundation is level. The height
of the foundation must not exceed 8 inches
(203 mm).
6. Use the mounting bolt layout to properly position
the mounting bolts in the wet concrete.
NOTE: When using any anchoring bolts, allow 1.5
inches (38 mm) to extend above the surface of the
concrete. Refer to the Machine Anchoring section.
7. Allow concrete to dry and cure before machine is
placed into service.