Filter
Top Products
16
REMOVING THE BELT (Figures 32-35)
Remove the key and disconnect the spark plug wire •
from the snow thrower.
Remove the engine pulley cover, the drive cover and •
the skid plate from the snow thrower.
Disengage the snow thrower clutch.•
Remove the belt from the top pulley.•
Engage the clutch.•
Remove the belt from the bottom pulley.•
Disengage the clutch.•
Lift up on the brake assembly and slip the belt between •
the brake assembly and bottom pulley to remove the
belt from the snow thrower.
INSTALLING THE BELT
Lift up on the brake assembly and slip the belt between •
the bottom pulley and the brake assembly.
Engage the clutch.•
Install the belt around the bottom pulley.•
Disengage the clutch.•
Install the belt around the top pulley. •
Make sure the belt runs inside all of the belt keepers.•
Replace the covers.•
Replace the key and reconnect the spark plug wire.•
SKID PLATE
PULLEY COVER
DRIVE COVER
BRAKE ASSEMBLY
FIGURE 32
FIGURE 33
FIGURE 34
FIGURE 35