Filter
Top Products
TDR Commands
Command
:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate
Begins a TDR or TDT normalization and reference plane calibration. Which
calibration is done (TDR or TDT) depends on the setting of the TDRTDT
control.
Command
:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate
:CANCel
Activates the cancel softkey during a TDR or TDT normalization and
reference plane calibration.
Command
:TDR{2 | 4}:RESPonse{1 | 2 | 3 | 4}:CALibrate
:CONTinue
Activates the continue softkey during a TDR or TDT normalization and
reference plane calibration.
Command
:TDR{2 | 4}:PRESet
Sets up the instrument for TDR or TDT measurements, based on the
stimulus.
37