Filter
Top Products
Command
:MEASure:TMIN[?] [<source>]
Measures the time at which the first minimum voltage of the source
waveform occurred. When FFT is the specified source, the frequency at
which the first minimum value occurred is measured.
<source>
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number> | FFT}
<number>
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Command
:MEASure:TVOLt[?] <voltage>,
<slope><occurrence>[,<source>]
Measures the time interval between the trigger event and the defined voltage
level and transition.
<voltage>
Voltage level at which time will be measured.
<slope>
The direction of the waveform change when the specified voltage is crossed,
either rising (+) or falling (-).
<occurrence>
The number of the crossing to be reported (if one, the first crossing is
reported; if two, the second is reported, and so on).
<source>
{CHANnel<number> | FUNCtion<number> |
RESPonse<number> | WMEMory<number>}
<number>
For channels: an integer, 1 through 4, indicating the slot in which the channel
resides, followed by an optional A or B identifying which of two possible
channels in the slot is being referenced. For functions: 1 or 2. For waveform
memories (WMEMory): 1, 2, 3, or 4. For TDR responses: 1, 2, 3, or 4.
Measure Commands
31