Agilent Technologies 54621A Sprinkler User Manual


 
6-12
Utilities
To set up the screen saver
To set up the screen saver
The oscilloscope can be configured to turn on a display screen saver when the
oscilloscope has been idle for a specified length of time.
1Press the Utility key, press the Options softkey, then press the Screen Svr
softkey to display the screen saver menu.
2Press the
Saver softkey to select the screen saver type.
The screen saver can be set to Off , to display any of the images shown in the
list, or can display a user-defined text string.
If User was selected. Spell selects a character to put in the highlighted position
shown in the "Text =" line above the softkeys.
a You may position the highlight on any character in the text string by
successively pressing the Enter key.
b Press the Spell softkey, then turn the Entry knob to choose from a list of
characters to enter in your user-defined text string.
c Press the Enter softkey to advance to the next character in the text string.
Pressing Enter saves the character shown in the Spell softkey to the character
position highlighted in the "Text =" line above the softkeys. The highlight
then advances to the next character position in the text string. The text string
can be up to 35 characters long.
Screen saver
image
Screen saver
time set
Return to
previous menu
Preview
Spell
Enter
List of characters displayed
when Entry knob is turned
User-defined
text string