Filter
Top Products
Step 3. Wait for the bridge to start up
Connect
76
Press the “REGISTER” button only once during initial installation. DO NOT
PRESS THE REGISTER BUTTON AGAIN AFTER YOUR BRIDGE HAS BEEN
SUCCESSFULLY REGISTERED, or you will lose previously stored weather
data and have to register again!
Acu-Link Tip
After connecting the power and Ethernet cable, the
Acu-Link Internet Bridge may need up to 30 MINUTES to
start up and automatically download the latest software
before it can register with the server.
1. Make sure that BOTH
status lights are blinking rapidly.
2. Press AND HOLD the “REGISTER” button on the
bottom of the Acu-Link Internet Bridge for 4 SECONDS.
Step 4. Prepare the Bridge for Registration
The Acu-link Internet Bridge will transmit your weather
information to the secure AcuRite servers. From there you
will be able to view and track this information via the
web site or by downloading and using the Acu-Link APP
for iPhone and Android smart phones, we will cover that
later.
Before you can access all this wonderful information, you
must first “make the connection” by registering your
bridge.
STATUS
LIGHT 1
STATUS
LIGHT 2
BLINKING
STATUS
LIGHT 1
BLINKING
STEADY
MAY TAKE
UP TO
30 MINUTES
STATUS
LIGHT 2
BLINKING
BOTH LIGHTS
ALTERNATING
BLINKING
WAIT READY
After plugging in the AC adapter the bridge will automatically
perform the following boot operations:
BLINKING
BLINKING
Initial Boot STEADY STEADY
STATUS LIGHT 1durationStartup Sequence
1
2
3
4
STATUS LIGHT 2
30
seconds
Downloading
firmware from
Acu-Link server
Ready for Use
BLINKING
RAPIDLY
BLINKING
RAPIDLY
BLINKING
RAPIDLY
STEADY
5 to 30
minutes
Re-Booting STEADY STEADY
30
seconds
READY