Filter
Top Products
Getting to Know the Acu-Link Internet Bridge Choosing a location
The Acu-Link Internet Bridge receives data from sensors via
433mhz wireless radio frequency. Reception range of the
signal from sensors can be limited by very thick concrete or
metallic walls or materials. Other “noisy” electronic devices
such as TVʼs and microwaves may also interfere with the signal
reception.
To help ensure a successful reception from the AcuRite sensors,
choose a suitable location no more than 330 feet from the
sensor to place the Bridge. Choose a location free of large
stone or concrete surfaces, metallic surfaces, and place at least
3 feet away from other electronic devices.
Weather Sensor RF
Reception antennae
Connections
STATUS LIGHT 2
RF Reception
STATUS LIGHT 1
Network Uplink
DEVICE I.D.
(MAC Address)
Ethernet
Port
Power
Port
Connect
32
A unique ID that
is needed to
register your
bridge online.
Register Button
(bottom)
You will need the MAC address number that is printed on the bottom of the
bridge when it comes time to register your bridge online, so write it down
and keep it handy!
Acu-Link Tip
330 feet Maximum
(100 meters)
sensor(s)
Acu-Link
Internet
Bridge
Add Additional Sensors
Look for this logo on products that have sensors that are
compatible with your Acu-Link Internet Bridge. Visit the
web site for the most up to date complete listing of
Acu-Link compatible sensors.
C O M P A T I B L E