Filter
Top Products
Site Survey Edit Menu 11
Site Survey Edit Menu
The Site Survey utility Edit menu contains Site Survey, Area, and Settings
pull-down menus.
Use these menus to edit an open AirConnect site survey, display a list of coverage
areas within the survey, and use the Setup, Meter Settings, Sounds and Logging
property pages to configure surveyor, system sounds, and test data logging
information.
Editing Site Survey
Information
Select
Site Survey
in the Edit menu to display the Site Survey dialog box. Use
the Site Survey dialog box to enter the site name, surveyor, and description. If a
workspace is already open, the user is prompted to save the existing workspace.
Click
OK
to display the new workspace name.
Surveyor. Enter the surveyor name in the
Surveyor
field to automatically
update the New Site Survey dialog box. Click
OK
to save the updated surveyor
name in the registry for subsequent surveys.
ICMP Host Addr. Enter an ICMP Host Address in the field provided (not needed
for WNMP ping tests). The default address is the default address of the AP.
Ping Count. Enter the number of pings to be transmitted during the ping test in
the Ping Count field. The default Ping Count is 100, with a maximum of 2000.
Rerun Count. Enter the number of times the ping test is transmitted in the
Rerun Count field. The default Rerun Count is 100. The rerun can be continuous
Packet Size. Enter the packet size transmitted during the ping test in the Packet
Size field. The default Packet Size is 128 bytes, with a maximum of 1472 bytes.
Threshold Time. Enter the maximum acceptable time to send out and receive
the total number of pings for each test in the Threshold field. Choose a Threshold
Time from1 second to 3600 seconds. The default Threshold Time for 100 pings is
13 seconds.
Auto Rerun. If
Auto Rerun
is activated, the Site Survey utility test suite (in either
Automatic or Manual mode) runs continually until the surveyor stops the tests.
Editing Site Survey
Area Properties
Select
Area
in the Edit menu to display the Site Survey Area List dialog box. Use
the Site Survey Area List dialog box to display a list and description of survey areas.
Select an area and click
Edit Area
to display the Site Survey Area dialog box. Add
new tests and survey area descriptions as needed. Click
OK
to save the changes to
the site survey workspace. Click
Delete
to remove the area from the current site
survey workspace.