Display Controller and Modes
TOSHIBA A40 Series D6
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
■ The way to move to multimonitor
a. Press Ctrl + Alt + F12 keys to make Intel
®
82852/82855
GM/GME Graphics Controller Prope... displayed. (See the figure
below)
b. Click
in the left of Devices tab (see the figure below), then
select Extended Desktop.
c. Check that the Primary Device is fixed into Note Book (the
display of the computer) and the Secondary Device is being fixed
into Monitor (CRT display).
Intel
®
82852/82855 GM/GME Graphics Controller Prope...
2. Some reproduced DVD picture may not be displayed when the display
of the computer and an external CRT monitor are used at the same.
Reduce the resolution, use the display of the computer only, use the
CRT monitor only or set display device in the multimonitor, then play
DVD.
Please refer to External monitor in the online manual of Chapter 8,
Optional Devices, or the application guide for the setting of each
display device.
