Optional Devices
TOSHIBA A40 Series 85
TOSHIBA A40 Series Version
1
Last Saved on 02/12/2003 17:24
ENGLISH using Euro_M.dot –– Printed on 02/12/2003 as IM_A40EN
Installing a memory module
To install a memory module, make sure the computer is in boot mode
then:
1. Turn the computer off in boot mode. Refer to the Turning off the
power section in Chapter 3.
2. Remove all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack (refer to
Chapter 6, Power and PowerUp Modes.)
4. Slide the display latch on the front of the computer to the right and
open the display panel.
5. Insert your fingernail or a thin object under the rim of the keyboard
brace and lift out the brace.
Removing the keyboard brace
6. Remove two screws securing the keyboard and one screw securing
the metal brace. Lift off the metal brace.
Use a point size 0 Phillips screwdriver.
