A SERVICE OF

logo

Open as PDF
next previous
378 WinView/32 Manual Version 2.4.M
Virtual Chip dialog box
Clicking
Virtual Chip
on the Setup menu opens the Virtual Chip dialog box as shown
in Figure 340. This screen is used to set the parameters for Virtual Chip operation, a
special fast-acquisition technique that allows frame rates in excess of 100 fps to be
obtained. For the Virtual Chip selection to be present, it is necessary that:
the system be a PentaMAX, MicroMAX (1 MHz or 5 MHz) or ST-133,
that the camera have a frame transfer chip such as the EEV 512 × 1024 FT, and,
Figure 339.
Small cross
(left) and large
crosshair
(right) cursor
selections.
Figure 340.
Virtual Chip
dialog box.