6
In TV mode:
- channel number or name or the selected external
-a volume bar
-feed back messages
- the surround signal the TV is processing
In DVD mode:
- the type of disc that is in the slot (DVD,VCD,
CD...)
- the track, title, chapter and time indication
- the surround signal the TV is processing
In Radio mode:
- the name of the selected station, the type of
programme, the frequency
-a volume bar
- the RDS icon when playing a radio station with
RDS signal
- the sound signal (stereo)
- the surround signal the TV is processing
Contents of the LCD display
To use the menus
& Press the MENU key on the remote control to summon the
main menu.At any moment you can exit the menu by
pressing the
MENU key again.
Note: If you have connected equipment with Cinema Link, more
menu items are present.
é Use the cursor in the up/down direction to select the TV,
Setup, Demo or Install menu.
Use the cursor left/right to select
Picture, Sound or
Features.
Note: Sometimes not all the menu items are visible on the screen
(indicated by a cluster of blue balls). Use the cursor down or right
to reveal all items.
“ Use the cursor in the left/right direction to select the menu
item.
‘ Use the cursor up/down again to select the control you
want to select or to adjust.
Note: Items temporary not available or not relevant are displayed
in a light grey colour and cannot be selected.
TV
Setup
Demo
Install
Picture Sound Features
B
®
®
®
®
Ì
®
v
º
S
bæ
MENU
+
V
¬
+
P
Select
VCR DVD SAT AMP CD
OK
Ò‡π
†
cursor to select
adjustments
OK key to
activate
return or switch
main menu on/off
ro starts blinking when the TV is receiving a command from the remote control.
Dependent on the selected mode, the following information may be displayed:
Press the i key to get
information about the selected
menu item.
2214.2 gb 18-09-2003 14:07 Pagina 6
