27
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
EXT. 1 can handle CVBS and RGB, EXT. 2 CVBS, RGB and Y/C, EXT. 3 and EXT. 4 CVBS.
It is preferred to connect peripherals with RGB output to
EXT. 1 or EXT. 2 as RGB provides a better picture quality.
If your recorder is provided with the EasyLink function, it should be connected to
EXT. 2 to benefit from the
EasyLink functionality.
Recorder (VCR+DVD+RW)
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune in
your recorder’s test signal and assign it programme number 0 or
store the test signal under a programme number between 90 and
99, see Manual installation, p. 8.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 11. You can also connect your decoder directly to
EXT. 1 or 2 with a eurocable.
Other equipment (except digital sources)
& Connect the aerial cables 1, 2 and 3 as shown (only if
your peripheral has TV aerial in-/output).
Better picture quality can be obtained if you also connect
eurocable 5 to
EXT. 2 and a eurocable 4 to EXT. 1, 3 or 4.
é Look for the test signal of your peripheral in the same way as
you do for a recorder.
When a recorder is connected to
EXT. 1 you can only record a
programme from your TV. Only when a recorder is connected to
EXT. 2 it is possible to record a programme from your TV as well as
from other connected equipment.
Digital equipment (DVD, Digital Set Top Box, ...)
& Connect your digital equipment with a eurocable 1 to one of
the euroconnectors
(EXT 1, 2, 3 or 4), or with a cinch cable to
the video input at the right side of the TV.
é To enjoy Multichannel surround sound from digital sources with
a Dolby Digital audio output also connect an audio cable 2 to
one of the two digital audio in sockets of your TV. Make a
selection in the Setup, Source menu, p. 11.
“ According to the connected digital equipment, select DVD, SAT,
Game or Digital STB in the Setup/Source menu. See p. 11.
1/21/2
EXT.EXT.
1/2
EXT.
CABLE
1
2
3
5
4
1/2/3/4
EXTERNAL
1
2
DIGITAL
AUDIO IN
Connect Peripheral Equipment
2214.2 gb 18-09-2003 14:07 Pagina 27
