A-3
(5) Emergency stop
(6) Maintenance, inspection and parts replacement
(7) Disposing of the inverter
(8) General instructions
CAUTION
z Provide a safety backup such as an emergency brake which will prevent the machine and equipment from hazardous conditions if
the inverter fails.
z When the breaker on the inverter primary side trips, check for the wiring fault (short circuit), damage to the internal parts of the
inverter, etc. Identify the cause of the trip, then remove the cause and power on the breaker.
z When any protective function is activated, take the appropriate corrective action, then reset the inverter, and resume operation.
CAUTION
z Do not carry out a megger (insulation resistance) test on the control circuit of the inverter.
CAUTION
z Trest as industrial waste.
Many of the diagrams and drawings in this instruction manual show the inverter without a cover, or partially open. Never run the
inverter in this manner. Always replace the cover and follow this instruction manual when operating the inverter.
