••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
Connections
21
/AUTO SET UP
Connections (continued)
SCSI number chart
ID4 • ID5
SCSI ID
Number
0
1
3
4
5
2
Purpose
#1
HDD expansion/
HDD recording
Archive
#1
Notes
Maximum recording capacity
is 2TB per unit.
Maximum recording capacity
is 2TB per unit.
Maximum recording capacity
is 2TB per unit.
Maximum recording capacity
is 130GB per unit.
Connected
device
HDD
DDS/RDD
HDD
[ARCHIVE
•
COPY]
[ARCHIVE
•
COPY]
[HDD]
[HDD]
HDD
* RDD: Abbreviation of removable disk drive.
Select a disk drive which can eject the recording medium.
* HDD: Abbreviation of hard disk drives.
Please use those which include self-defect capabilities.
* DDS: Abbreviation of digital data storage.
Select a recording medium which uses tape.
* When hard disk drives are connected to ID0, ID1, ID2, or ID3,
the displayed estimated time will include the external HDD.
When storage capacity is expanded to its maximum, however, there will
be instances where the times set for long recording intervals are not dis-
played correctly.
Copy
#1
Maximum recording capacity
is 130GB per unit.
DDS/RDD
HDD
HDD
When connecting a CD-R/RW as peripheral record-
ing device, set the SCSI ID No. to ID4. Use of ID5 is
not possible.
Storage capacity is indicated in gigabytes (GB).
(1GB = 1000 x 1000 x 1000 bytes.)
Storage capacity is indicated in terabytes (TB).
(1TB = 1000 x 1000 x 1000 x 1000 bytes.)
■ AUTO SET UP
AUTO SET UP is displayed and done when the DVR is
turned on for the first time (out of box).
Only when the unit is turned on for the first time,
the AUTO SET UP screen is displayed automatically. It
is not automatically displayed after next time.
1. After connecting the cameras and the monitors, turn on the
MAIN switch on the rear of the unit and wait until the ACCESS
indicator is turned off, then press the POWER button on the
front.
• The <LANGUAGE SELECTION> screen is displayed. The
language of the menu can be selected in this screen.
<LANGUAGE SELECTION>
>>
LANGUAGE ENGLISH
EXECUTE
JOG :SELECT
SHUTTLE>>:EXECUTE
2. Turn the SHUTTLE ring clockwise.
• The background of the setting changes to red and flashes.
• Setting ( default : “ENGLISH” )
“ENGLISH”, “FRANCAIS”, “ESPAÑOL”
3. Turn the JOG dial to display the desired setting and turn the
SHUTTLE ring clockwise.
• The setting is confirmed and flashing stops.
While in the AUTO SET UP, the menu screen can
only be exited if “NO” to “AUTO SET UP” is selected.
4. Turn the JOG dial to move the cursor to “EXECUTE”, and
turn the SHUTTLE ring clockwise.
• The <TIME DATE ADJUST> screen appears.
• The date/time is set in this screen.
<TIME DATE ADJUST>
>>
DAYLIGHT SAVING OFF
MONTH 01
DAY 01
YEAR 2003
TIME 00:00:00
APPLY
EXECUTE
JOG :SELECT
SHUTTLE>>:EXECUTE
5. Set the desired setting in this screen referring to “
♦
DAY
LIGHT SAVING/DAYLIGHT SETTING ( see page 25)”, “
♦
TIME DATE ADJUST ( see pages 25, 26)”.
Turn the JOG dial (the cursor) to “APPLY” and turn
the SHUTTLE ring clockwise, “time period” of “TIME”
will start.
6. Turn the JOG dial to move the cursor to “EXECUTE”, and
turn the SHUTTLE ring clockwise.
• “PERFORM AUTO SET UP?” is displayed on the screen.
PERFORM AUTO SET UP?
>>
YES
NO
SHUTTLE>>:EXECUTE
7-1. (When not executing AUTO SET UP • • • )
Select “NO” by turning the JOG dial and turn the SHUTTLE
ring clockwise.
• “SETTING UP...” is displayed on the screen, and the unit
starts-up.
7-2. (When execute AUTO SET UP • • • )
Select “YES” by turning the JOG dial and turn the SHUTTLE
ring clockwise.
• The <CAMERA CHECK> screen appears.
• The cameras connected and their video can be confirmed
in this screen.
<CAMERA CHECK>
>>
EXECUTE
CHECK CAMERA CONNECTION AND
IMAGE BEFORE EXECUTE
SHUTTLE>>:EXECUTE
To execute AUTO SET UP again, from stand-by
(MAIN switch is “ON”, but POWER button is “OFF”)
press and hold the ARCHIVE button and the POWER
button. Note that menu recording settings will be reset.
