A SERVICE OF

logo

SPA START-UP cont...
FILLING THE SPA WITH WATER cont...
4) Fill the spa to the bottom of the pillows.
Note: DO NOT OVER-FILL YOUR TUB!
5) With the front panel off, verify there are no leaks at the pump union.
Note: Pump unions can become loose during shipping. Verify that
there are no leaks during lling of the spa.
6) Replace both lters.
TURNING THE POWER ON
Turn the power to the spa on at the main circuit breaker. Verify that your
spa has no error codes. (See page 12) Verify that there is good
water circulation in the spa. The pump will initially come on for 5 min-
utes and cycle through each pump for one minute on each pump at start
up.
VERIFYING WATER CIRCULATION
1) Open all the jets.
2) Press the Jets 1/2/3 button to turn the pumps on or off.
3) Make sure each seat has water ow.
50