32 Logging
Setting logging options
Setting logging options
To set logging only options (Average, Peak, Maximum, Minimum)
Enabling or disabling logging options
1. Ensure you are at the start screen.
• If turned on, repeatedly press On/Off/Esc until you return to the
start screen (see Figure 3-3 above).
• To turn on, press and hold On/Off/Esc until the start screen
appears.
2. Press Up/Down to highlight Setup and then press Enter .
3. Select Logging by pressing Up/Down to highlight and then press
Enter .
4. To change the Logging options for Meter 1 do the following:
a. Press Up/Down to highlight either AVG, PEAK, MAX, MIN.
b. Once the measurement is selected, press Enter button to
toggle between “On” or “Off”. Press right/left arrow to move back
to logging field.
NOTE: If you are setting Meter 2 options, ensure you are on Meter 2 by
pressing the Meter 1/Meter 2 softkey, and then repeat step 4a-b.
Figure 3-8: Logging screen explained
5. To change the Exceedance Levels on Meter 1, press Up/Down to
select either L1 or L2
Set % by using the up/down
arrows.
• L1
• L5
• On/Off setting
• Logging rate which can
be set at various
minutes and second
values
On/Off setting
• AVG (average)
• Peak
• MAX (maximum)
• MIN (minimum)
