Filter
Top Products
26
5. Tighten the mounting nut securely with the bar tip
held up (SE9)(TORQUE: 8.9~11.7 N.m./90~120 kg-
cm). Then check the chain for smooth rotation and
correct tension while moving it by hand. If
necessary, readjustment.
(1) Tighten
It is very important to maintain the proper chain
tension. Rapid wear of the guide bar or the chain
coming off easily can be caused by improper
tension. Especially when using a new chain, take
good care of it since it should expand when first
used.
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Depending on the working posture, slide clamp up or
down until unit balances and the strap fits your
body.
WARNING
SE9
6. Set up
English